Product was successfully added to your basket.

Star Star Star Star Star
Share this product
  • Name
  • Your Email Address
  • Recipient Name
  • Recipient Email Address
  • Message
Successfully added to your basket
Heatrae Megaflo Eco Ddd250 250l Direct Unvented Cylinder
Heatrae Megaflo Eco Dd250 250l Direct Unvented Cylinder
Heatrae Megaflo Eco Dd250 250l Direct Unvented Cylinder

Heatrae Megaflo Eco Ddd250 250l Direct Unvented Cylinder

New Merchandise Created with Sketch.
Item Code: 178561
Expected Delivery:  2 - 3 working days
help and info
Need Help?  0800 181 4488
Ex. VAT £1,162.38 Inc VAT

Additional Information

Brand Heatrae
Lead Time 2 - 3 working days
Capacity (litres) 250 - 299
Heating type Direct
Immersion 3 x 3kw
Water supply Unvented
Height (mm) 1738
Width (mm) 579
Depth 579
Warranty Lifetime
Manufacturer Part No: 95050471
Diameter N/A


Megaflo 250DDD Direct Unvented Cylinder

The Megaflo Eco 250DDD Unvented Cylinder works as part of an Direct system in a 4-5 bedroom property with 2 baths and showers as well as other commercial uses.

As an unvented cylinder it provides a powerful hot water performance by using your properties mains water pressure.

Made from stainless steel, the HeatRae Megaflo Eco 250 litre model is built to last and even comes with a fabulous life time warranty.

With fantastic levels of heat and water retention, the HeatRae Megaflo Eco 250DDD model has been built with efficiency in mind and is able to handle up to 15 bars of pressure, up to 5 times more than standard operating pressure levels.


  • Height: 1738mm
  • Diameter: 579mm


  • Capacity: 250 litres
  • Element rating at 240V: 3x3
  • Coil rating: N/A
  • Weight (when empty): 48kg
  • Weight (when full): 298kg

Key features of MegaFlo Eco 250DDD

  • Resistant duplex stainless steel casing  - can handle pressures up to 15 bar
  • Coil-in-coil' heat exchanger
  • Insulated outer casing -  increased heating efficiency & pressure relief
  • Unique floating baffle system allows water expansion
  • No anode -  Removes need to replace or maintain
  • Easy to install
  • Immersion heater design increases levels of hot water
  • Titanium immersion heater
  • Reduction in levels of cold water mixing with hot water
  • Enjoy flowrates up to 20% higher than usual due to the Water inlet controls
  • Improved performance at low pressures down to 1 bar
  • Lifetime manufacturer warranty.
  • Manufactured in UK.

Whats in the Box:

  • 1 x  Megaflo Eco 250DDD Direct Unvented Cylinder
  • Factory fitted immersion heater and thermal controls
  • Titanium elements
  • Cold water inlet control kit: 0.3MPa (3 bar) pressure reducing valve, 0.8MPa (8 bar) pressure relief valve (BS EN 1567, BS EN 1491 EN 13959) 1/4 turn isolating valve, line strainer, non-return valve, drain valve with hose connection, required nuts and olives
  • Factory fitted temperature and pressure relief valve set at 90 degrees / 1 MPa (10 bars) (BS EN 1490)
  • T&P valve insulation kit
  • 15/22mm Tundish

Order your HeatRae Megaflo Eco 250DDD cylinder from Direct Heating Supplies for speedy delivery and a fantastic low price.

Direct Cylinders

Note: This model is a Direct Cylinder and most commonly used to heat hot water only via electric immersion without the need of a separate boiler.

We strongly recommend that customers looking to purchase a hot water cylinder double check with their installer first to ensure it is the correct version needed for the installation. The return incorrectly purchased hot water cylinders may involve a restocking fee and expensive carriage charges - for further information or advice please contact us.